Unit E2, Doulton Road Trading Estate, Rowley Regis, West Midlands, B65 8JQ
Tel: 01384-569821    Fax: 01384-633946

The DrillSprint 500 - Specification

Machine capacity

Work envelopeLow profile parts

470mm wide (X), 225mm deep (Y), 70mm high (Z)

High profile parts

470mm wide (X), 180mm deep (Y), 530mm high (Z)

Table T slotted area

203mm x 432mm

Table size

254mm x 508mm

Drilling

12.5mm dia. mild steel, 16mm dia. cast iron

Tapping

M10 mild steel, M12 cast iron

Spindle drive

Type

2 speed motor via a 2 step pulley

Motor

A.C. 1 H.P. two speed induction motor

Turret

3 speed ratio turret. Spindles 1 and 4 high. 2 and 5 medium. 3 and 6 low.

Spindle speeds

12. Six available within a programme

High ratio pulley

Low ratio pulley

low motor speed

2005

1275

815

675

430

275

high motor speed

4010

2550

1630

1355

860

550

Turret

Number of stations

Six, sequential operation, clockwise

Index

Mechanical, programmable

Spindle nose

5/8 in. x 16 UNS male thread

Spindle runout

0.015mm T.I.R. max @ pilot dia.

Turret slide (Z axis)

Working stroke

130mm

Feedrate range

0 - 2,500mm/min stepless, programmable

Rapid traverse rate

7500mm/min

Drive

D.C. servo motor driven ballscrew

Two axes table

Type

Two axes on linear recirculating ball bearings, ballscrew driven.

Working stroke X axis

475mm

Working stroke Y axis

230mm

Rapid traverse rate

7500mm/min

Drive motor

D.C. servo

Positioning accuracy

0.025mm over 250mm

Lubrication

Turret head

integral oil bath

Turret slide (Z axis)

Automatic lube system

Table ballscrew nuts

Automatic lube system

Coolant system (optional)

Type

Centrifugal pump ¼ HP

Application

Overhead supply, programmable

Flow rate

2 litres/min

Reservoir capacity

20 litres working

Power supply

Electrical rating

415/440 volts, 3 phase, 50/60 Hz

Power requirement

2 kW continuous

Control

Type

E.I.L. Model 1000 CNC with durable oil impervious Mylar touch sensitive key panel for data entry.

Display

LCD in plain language. No codes

Manual controls

All slides, spindle, coolant and index

Data entry

a) manual by function prompt and numeric keys.
b) by 'teach and learn' using Jog keys

Functions controlled

Turret slide; feedrate; rapid and stop position; datum position; table x and y rapid position; spindle speed; auxiliary functions; dwell times; table and tool offsets.

Canned cycles

Drilling, tapping and P.C.D.

Axes control

Point to point, 3 axis servo positioning

Memory extension (optional)

Type

Cartridge interface unit with a plug in 64K RAM cartridge, battery backed. Cartridge storage capacity is 60 programmes, or 6,000 programme lines whichever is the greater. Additional cartridges available.

Both interface and cartridge units are transportable and compatible for use on any DrillSprint 500 machine control having necessary internal interface.

Safety

Safety guard

Partially enclosed table guard with vertical sliding clear acrylic panel for access, electrically interlocked.

Emi-Mec DrillSprint 500 Measurements

Back to Top